Configuration Examples‎ > ‎HP / HPE‎ > ‎Aruba HPE‎ > ‎

NTP / Network Time Protocol

How to configure NTP / SNTP on an HP Procurve switch

sntp unicast
timesync sntp
sntp server priority 1 1.2.3.4


Depending on the version, you may require a slightly different syntax

sntp unicast
timesync sntp
sntp server 1.2.3.4


Change the 1.2.3.4 to be the IP address of your NTP server. I often use domain controllers as an NTP server as they automatically run NTP.

Make sure you write the config to memory afterwards.

write mem